Electrical Energy: The Inverter

400W 12V inverter with alligator clips and aluminum housing/heat sink. 240V 10A 50Hz

Simply put: the Inverter changes DC current into AC current.

Usually the voltage and frequency output are based on household AC but other voltage/frequency combos are possible.

Some inverters made for AC motors such as electric bicycles produce variable frequency 3 phase AC.

Because of the high current and voltage and current (240V 10A) produced by Inverters they are extremely dangerous.

Inverters are rated for a certain wattage output so when plugging in a device into an inverter check to make sure the inverters total wattage is not being exceeded.

Inverters usually make a alarm tone when they are running low on current, which is usually the sign the battery they are connected to is almost drained of current.

Inverters are quite inefficient with losses of 50% on inversion being typical.

If you have battery banks use DC wherever possible to effectively double your usable energy.

Some newer inverters are designed with a cigarette plug as the DC power connector.

these cannot be used for more than 150W rated devices because of the limitation of current flow through the cigarette plug.

For power consumption greater than 150W use large size alligator clips or heavy gauge battery terminal connectors.

Inverters are sold as square wave, modified sine wave or pure sine wave.

pure sine wave inverters are the most expensive and the extra expense (normally double the price of a modifies sine wave model of the same wattage) are only really noticed in some  Hi-Fi and television equipment.

If the device you are plugging into an inverter contains a rectifier, the exact shape of the wave matters less at the wave is being recitficed to DC, so a modiifed sin wave would be perfectly acceptable here.

square wave inverters are acceptable for very simple application such as incandescent bulbs.

Inductive load

Devices such as fluorescent lights and some devices with large motors such as some fridges have high inductive load and must be either modified before inverters are used or not used at all.

<check this>

grid connect

<research>

Advertisements

One thought on “Electrical Energy: The Inverter

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s